PCT Line Passives
S/A & Regal Compatible

A line power inserter combines RF signal and 60 or 90 volts AC and is placed after a line power supply. It inserts power into the trunk or feeder lines to serve the active modules while providing isolation between the AC and RF networks.

A directional coupler is an unequal power divider; a splitter is an equal power divider. Both devices split the network's trunk and feeder lines.

The 1 GHz frequency rating of the directional couplers, splitters, and power inserters, coupled with outstanding insertion loss and hum modulation characteristics ensure their reliable performance in the most demanding applications.

True Performance:

• 1 GHz Bandwidth with minimal insertion loss
• 110 dB shielding effectiveness (RFI)
• RFI gasket ensures against ingress/egress interference
• Available in standard Buss Bar configuration (Fuseable configuration available upon special request)
• CE certified
• Conforms to all applicable SCTE standards

• Heat shrink ridges for easy installation

• Stainless steel hardware for corrosion resistance
• Aluminum alloy housing with weather resistant powder coating
• Weather seal gasket ensures water tight protection, tested at 15 PSI